Weight and Balance

From Air Navigation User Manuals
Revision as of 14:39, 21 August 2015 by Oliver (talk | contribs)
Jump to navigation Jump to search

Wyb.jpg

The Aircraft profile has been updated with definition of Weight and Balance envelope values and weights/arm locations. When a profile is selected you can easily compute weight and balance with the W&B Calc tool under «Tools» menu.

caption





Once everything is set and all the values are entered, you will be able to see the calculation reflected on a graph, under «Tools» menu.








As mentioned before, the W&B tool is located in the Aircraft profile under «Document Browser».

Wyb3.jpg

On the screenshot at the upper-right corner of this page, you will see the available fields to be completed. The weights for seats, baggage and misc will be entered from the «Tools» menu AFTER the rest of the data has been already completed. The same happens to the amount of fuel.


Note: you need to enter at least 4 points for envelope data.


Example on W&B tool

In order to complete data related to the aircraft’s nature, you MUST use a certified manual of the aircraft’s model.

caption

This is NOT a certified calculator.


Let’s first complete the data concerning the aircrafts specifications. We’ll take a C150 as an example.

caption





In order to complete the «Envelope» data, the values are taken from the CG Envelope Graph.

Example3.jpg












We proceed with the Seats, Fuel and Baggage, as shown in the screenshot.

Ex1.jpg

Note: The Miscellaneous part is optional.

caption

After the module is completed, we then make sure to have the Aircraft profile selected from the aircraft list (see the green mark on the left side of the profile).


Finally, we go to the «Tools» menu and we select the «W&B Calc» panel, from where we will complete with the weights and fuel information:

Ex3.jpg


Note: once we have the module completed, we proceed to press on the button «Calculate».



Back to index